Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
- 10. Automatic transmission
   10.2. General information
   + 10.3. Diagnostics
   + 10.4. Adjustment and replacement of a cable of a choice of transfers
   10.5. Check and adjustment of a cable of management of a butterfly valve
   + 10.6. Check, replacement and adjustment of the switch of blocking of a starter
   + 10.7. Lock of blocking of the lever of a choice of transfers
   + 10.8. Replacement of sealing rings
   - 10.9. Check and replacement of support of a transmission
      10.9.1. Removal
      10.9.2. Installation
   10.10. Electronic control system
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment


10.9.2. Installation

PERFORMANCE ORDER
1. Install the hydrotransformer on an entrance shaft of a transmission.
2. Being careful, establish a transmission on the engine, thus turn the hydrotransformer so that openings under a bolt in a gidrotransfor to Matyora and a plate of the drive were combined.
3. Fix a transmission on the engine bolts, having tightened them the demanded moment.
4. Being careful, slowly establish a transmission with the engine in a motor compartment of the car.
5. Fix a transmission on the engine bolts, having tightened them the demanded moment.
6. Being careful, slowly establish a transmission with the engine in a motor compartment of the car.
7. Establish support of the power unit and fix them bolts.
8. Further installation is made in sequence, the return to removal.
9. Fill in cooling liquid in the cooling system, engine oil in the engine and oil in a transmission.