Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
- 1. Maintenance
   1.2. Frequency of service
   - 1.3. Maintenance
      + 1.3.1. Each 400 km or weekly
      + 1.3.2. Each 5 000 km or 3 months
      - 1.3.3. Each 10 000 km or 6 months
         1.3.3.1.1. Type A
         1.3.3.1.2. Type B
         1.3.3.2. Check of a free wheeling and height of installation of a pedal of coupling
         + 1.3.3.3. Check and service of the accumulator
         + 1.3.3.4. Check and replacement of a driving belt
         + 1.3.3.5. Check of tightness of hoses and effluence of liquids
         1.3.3.6. Check of the cooling system
         1.3.3.7. Change of provision of installation of tires
      + 1.3.4. Each 25 000 km or 12 months
      + 1.3.5. Each 50 000 km or 24 months
      + 1.3.6. Each 100 000 km or 48 months
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment


1.3.3.2. Check of a free wheeling and height of installation of a pedal of coupling

GENERAL INFORMATION

Elements of adjustment of a free wheeling and height of installation of a pedal of coupling

PERFORMANCE ORDER
1. Establish a steel ruler about a coupling pedal and measure height of installation of a pedal of coupling. Press a coupling pedal before emergence of notable resistance and measure a free wheeling of a pedal of coupling.
2. Weaken a lock-nut on the end of a pusher of coupling.
3. Turning a coupling pusher, establish a free wheeling of a pedal of coupling in the demanded limits.
4. Tighten a lock-nut.
5. After adjustment of a free wheeling of a pedal of coupling, check height of installation of a pedal.
6. If height of installation of a pedal of coupling does not correspond to the demanded values, weaken a lock-nut and turn a persistent bolt until the demanded height of installation of a pedal of coupling is established. Tighten a lock-nut.