Kamri's Toyota + General data + 1. Maintenance + 2. Engine + 3. Six-cylinder V6 engines + 4. Capital repairs of engines + 5. Cooling and heating + 6. Fuel system + 7. System of ignition + 8. Toxicity decrease + 9. Transmission + 10. Automatic transmission + 11. Coupling and power shafts - 12. Brake system 12.2. General information 12.3. Anti-blocking system of brakes (ABS) 12.4. Replacement of brake shoes of disk brakes + 12.5. Support of disk brakes + 12.6. Brake disk 12.7. Replacement of brake shoes of drum brakes + 12.8. Working brake cylinder + 12.9. Main brake cylinder 12.10. Brake pipelines and hoses 12.11. Pumping of hydraulic brake system + 12.12. Vacuum amplifier of brakes 12.13. Replacement of brake shoes of the emergency brake on back disk brakes + 12.14. Adjustment of the parking brake + 12.15. Replacement of a cable of the emergency brake + 12.16. Stoplight switch + 13. Suspension bracket + 14. Body + 15. Electric equipment
|
Disk brakes
Thickness of a forward disk:
|
– the nominal |
28 mm
|
– the minimum |
26 mm
|
Thickness of a back disk: |
– the nominal |
10 mm
|
– the minimum |
9 mm
|
Beating of a brake disk |
0,05 mm
|
Minimum thickness of a block of the emergency brake |
0,8 mm
|
Drum brakes
Thickness of a brake slip
|
1,6 mm
|
Internal diameter of a drum: |
– the nominal |
228,6 mm
|
– the maximum |
230 mm
|
Tightening moments
Bolts of fastening of a support:
|
– forward support
|
30 Nanometer
|
– back support |
20 Nanometer
|
Brake tubes
|
26 Nanometer
|
Bolts of fastening of the working brake cylinder |
10 Nanometer
|
The main brake cylinder to the vacuum amplifier |
12 Nanometer
|
The vacuum amplifier of brakes to a partition |
12 Nanometer
|
|
|