Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum brakes
   + 12.8. Working brake cylinder
   + 12.9. Main brake cylinder
   12.10. Brake pipelines and hoses
   12.11. Pumping of hydraulic brake system
   + 12.12. Vacuum amplifier of brakes
   12.13. Replacement of brake shoes of the emergency brake on back disk brakes
   + 12.14. Adjustment of the parking brake
   - 12.15. Replacement of a cable of the emergency brake
      12.15.2. Intermediate cable
      12.15.3. Forward cable of the emergency brake
   + 12.16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment


12.15. Replacement of a cable of the emergency brake

12.15.1. Back cable

PERFORMANCE ORDER
1. Lift back part of the car and record on supports. Remove the corresponding back wheel.
2. Check that the emergency brake is completely released and remove a brake disk or the brake drum.
3. On models with drum brakes remove brake shoes and disconnect a cable of the emergency brake from the lever on a brake shoe. On models with back disk brakes remove brake shoes of the emergency brake and disconnect a cable of the emergency brake from the lever on a back brake shoe.
4. Unscrew two bolts of fastening of a cover of a cable to a brake board.
5. Under the car unscrew bolts of all fastenings of a cable of the emergency brake.
6. Remove the central exhaust pipe.
7. Unscrew tightening bolts and take forward parts of back cables of the emergency brake from clips.
8. Disconnect forward parts of back cables of the emergency brake from the compensator.
9. Installation is made in sequence, the return to removal.

10. Adjust a cable of the emergency brake.