Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum brakes
   + 12.8. Working brake cylinder
   + 12.9. Main brake cylinder
   12.10. Brake pipelines and hoses
   12.11. Pumping of hydraulic brake system
   + 12.12. Vacuum amplifier of brakes
   12.13. Replacement of brake shoes of the emergency brake on back disk brakes
   + 12.14. Adjustment of the parking brake
   + 12.15. Replacement of a cable of the emergency brake
   + 12.16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment


12.10. Brake pipelines and hoses

GENERAL INFORMATION

Unscrewing of brake tubes
When unscrewing brake tubes it is necessary to use a cap wrench.

Unscrewing of a brake hose from a brake tube
When unscrewing a brake hose from a brake tube they need previously to be taken from a fastening bracket.

Brake tubes and hoses are applied to transfer of brake fluid from the main brake cylinder to working brake cylinders. Connection of tubes with brake cylinders and distributing devices is made by conical couplings. The ends of tubes are pressed out and have a cone-shaped form for the corresponding size of conical carving openings in brake cylinders or distributing devices.

PERFORMANCE ORDER

1. Before sinking of the ends of tubes the lock nut which after a vvinchivaniye of a cone-shaped surface in the conical bases of a carving opening presses is put on them and pressurizes a tube.

2. Brake hoses carry out mobile communications between mobile and motionless parts of the car. For reduction of losses of brake fluid at removal of working brake cylinders clips for a perezhatiya of brake hoses are used.