Toyota Camry

1992-1997 of release

Repair and operation of the car

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
- 14. Body
   14.1.1. Security measures when carrying out welding works
   + 14.2. Care of a body
   + 14.3. Care of an upholstery and rugs
   + 14.4. Repair of insignificant damages of a body
   14.5. Repair of strong damages of a body
   + 14.6. Cowl
   14.7. Trunk lid
   14.8. Back door
   + 14.9. Replacement of racks of support
   14.10. Door upholstery
   - 14.11. Doors
      14.11.2. Installation
   + 14.12. Lock, cylinder of the lock and handle of opening of a door
   14.13. Door glass
   14.14. Window regulator
   14.15. Front bumper
   14.16. Rear bumper
   14.17. External rear-view mirrors
   + 14.18. Seats
   14.19. Decorative overlay of a combination of devices
   14.20. Casings of a steering column
   14.21. Central console
   14.22. Ware box
   14.23. Check of a condition of seat belts
   14.24. Front grille
   14.25. Engine mudguard
+ 15. Electric equipment

14.11.2. Installation

1. Installation is made in sequence, the return to removal.
2. After installation of a door check that the gap on perimeter of a door was everywhere identical and also that the external surface of a door was aflush with other elements of a body. For adjustment of a gap on perimeter of a door weaken bolts of fastening of hinges of a door and, moving a door, adjust its situation then tighten fastening bolts.
3. For installation of a door aflush with other elements of a body weaken bolts of fastening of the hinge of a door to a door and otregul to a ruyta the provision of a door then tighten bolts.

4. Check that the door lock accurately comes on the shock plate located on a rack. If adjustment is necessary, weaken the screws fixing a shock plate, move a shock plate and tighten fastening screws.