Toyota Camry

1992-1997 of release

Repair and operation of the car

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
- 8. Toxicity decrease
   8.2. General information
   8.3. System of electronic control (TCCS)
   8.4. System of self-diagnostics
   + 8.5. Sensors
   - 8.6. Induction system of air supply in the engine (ACIS)
      8.6.1. Replacement
   8.7. System of catching of vapors of fuel (EVAP)
   + 8.8. System of repeated burning of exhaust gases (EGR)
   8.9. System of ventilation of a case (PCV)
   8.10. Catalyst
   8.11. Codes of malfunctions
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

8.6.1. Replacement

GENERAL INFORMATION

Preventions

In the presence in the code radio receiver against theft, before an accumulator detachment, check that you have connection codes.

On models since 1993 the system of the airbag of safety is disconnected if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for maintenance of system.

Details of the adjusting valve of induction system of air supply

PERFORMANCE ORDER

1. Remove a weight wire from the accumulator.

2. On the engine 3VZ-FE disconnect the electric socket from a fuel nozzle of cold start and a fuel supply hose.

3. Disconnect vacuum hoses from the vacuum amplifier of brakes, the valve of the mode of idling of central air and the adjusting valve.

4. Unscrew bolts and remove assembly of the adjusting valve from an air inlet chamber.

5. Clear the interfaced surfaces of a chamber of a vozdukhozaborna and cases of the adjusting valve.

6. Installation is made in sequence, the return to removal. Thus it is necessary to use new laying.