Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
- 11. Coupling and power shafts
   11.2. General information
   + 11.3. Check and replacement of a disk of coupling
   + 11.4. Vyzhimna bearing
   + 11.5. Main cylinder of coupling
   + 11.6. Working cylinder of coupling
   11.7. Removal of air from hydraulic system of coupling
   11.8. Starting switch of coupling
   + 11.9. Hinge of Equal Angular Speeds (HEAS)
   - 11.10. Replacement of protective covers and repair of hinges of equal angular speeds
      - 11.10.1. Models with the engine 5S-FE
         11.10.1.2. Check
         11.10.1.3. Assembly
      + 11.10.2. Models with the engine 3VZ-FE or 1MZ-FE
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment


11.10.1. Models with the engine 5S-FE

11.10.1.1. Dismantling

PERFORMANCE ORDER
1. Remove collars of fastening of a protective cover of the hinge of equal angular speeds.
2. Shift a protective rubber cover on a power shaft and take the three-humeral hinge from the hinge case.
3. Note mutual position of the three-humeral hinge and a power shaft for the correct repeated installation of the hinge on a shaft.
4. Remove a lock ring of fastening of the three-humeral hinge to a power shaft.
5. Using a hammer and a copper drift, bring down the three-humeral hinge from a power shaft.
6. Remove a protective cover from a power shaft.