Toyota Camry

1992-1997 of release

Repair and operation of the car


Kamri's Toyota
+ General data
- 1. Maintenance
   1.2. Frequency of service
   - 1.3. Maintenance
      + 1.3.1. Each 400 km or weekly
      + 1.3.2. Each 5 000 km or 3 months
      + 1.3.3. Each 10 000 km or 6 months
      + 1.3.4. Each 25 000 km or 12 months
      - 1.3.5. Each 50 000 km or 24 months
         + 1.3.5.2. Replacement of cooling liquid
         1.3.5.3. Check of system of catching of vapors of fuel
         1.3.5.4. Check of an exhaust system
         - 1.3.5.5. Replacement of oil in an automatic transmission and the main transfer
            1.3.5.5.1. Cleaning of the mesh filter
            1.3.5.5.2. Oil plums from the main transfer
            1.3.5.5.3. Filling with transmission oil
         1.3.5.6. Replacement of oil in a makhanichesky transmission
         1.3.5.7. Check of fastening of a suspension bracket
         + 1.3.5.8. Check and replacement of spark plugs
         1.3.5.9. Check and replacement of high-voltage wires and details of the distributor
      + 1.3.6. Each 100 000 km or 48 months
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment


1.3.5.5.1. Cleaning of the mesh filter
PERFORMANCE ORDER
1. Unscrew forward bolts of fastening of the oil pallet of a transmission, then weaken back bolts of fastening of the oil pallet.
2. Using a screw-driver, separate the pallet from a case of a transmission and merge the remained oil from a transmission.
3. After the termination oil plum from an automatic transmission unscrew the remained bolts and remove the oil pallet of a transmission.
4. Unscrew bolts of fastening of the mesh filter and remove it.
5. Wash out the mesh filter in fresh oil for avtomatiches ky transmissions.
6. Install the mesh filter on a transmission and fix bolts.
7. Clear the interfaced surfaces of a case of a transmission and the oil pallet. Note an arrangement of magnets in the oil pallet, remove them and wash up the pallet in solvent and drain it compressed air. Establish magnets on the oil pallet.
8. Install the oil pallet with new laying on an automatic transmission and fix it bolts, having tightened them the demanded moment.