| 1. Fill in a full tank of fuel. |
| 2. Remove back sitting and a protective cover of a fuel tank. |
| 3. Disconnect the electric socket from a fuel tank. |
| |
4. Using an ohmmeter, check resistance between contact mi 1 and 2 electric sockets.
At a full tank resistance between contacts 1 and 2 has to make 2–3 Ohms. |
| 5. Connect into place the electric socket and spend fuel almost to an empty tank. |
| 6. Measure resistance between contacts of 1 and 2 electric sockets which has to make 110–115 Ohms on an empty fuel tank. |
|
7. If resistance of the fuel level sensor does not correspond to the demanded values, replace the sensor. Resistance of the sensor can also be measured, having removed the sensor from a fuel tank and moving it with a hand. |