Toyota Camry

1992-1997 of release

Repair and operation of the car

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
- 9. Transmission
   9.2. General information
   9.3. Gear shifting cables
   9.4. Gear shifting lever
   9.5. Switch of light of a backing
   - 9.6. Removal and installation of a transmission
      9.6.2. Installation
   9.7. Repair of a transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

Взрослые проститутки Казани. | проститутки Владивостока: обзор интим салонов и индивидуалок

9.6.2. Installation

1. Apply a small amount of high-temperature greasing on the bearing in an end face of a cranked shaft.
2. Being careful, establish a transmission on the engine and fix bolts, having tightened them the demanded moment.
3. Being careful, install the power unit in a motor compartment of the car.
4. Establish support of the power unit and fix them bolts.
5. Further installation is made in sequence, the return to removal.
6. Fill in cooling liquid in the engine cooling system, engine oil in the engine and oil in a transmission. Start the engine and check it for lack of leaks.
7. Switch off the engine and repeatedly check the level of cooling liquid and engine oil.