Toyota Camry

1992-1997 of release

Repair and operation of the car


Kamri's Toyota
+ General data
- 1. Maintenance
   1.2. Frequency of service
   - 1.3. Maintenance
      + 1.3.1. Each 400 km or weekly
      + 1.3.2. Each 5 000 km or 3 months
      + 1.3.3. Each 10 000 km or 6 months
      - 1.3.4. Each 25 000 km or 12 months
         - 1.3.4.1.1. Disk brakes
            1.3.4.1.2. Drum brakes
            1.3.4.1.3. Check of the vacuum amplifier of brakes
            1.3.4.1.4. Check of the emergency brake
            1.3.4.1.5. Free wheeling and height of installation of a pedal of a brake
         1.3.4.2. Replacement of the air filter
         1.3.4.3. Check of fuel system
         1.3.4.4. Check of level of oil in the main transfer
         + 1.3.4.5. Check of a suspension bracket and steering
         1.3.4.6. Check of a protective cover of a power shaft
      + 1.3.5. Each 50 000 km or 24 months
      + 1.3.6. Each 100 000 km or 48 months
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment


1.3.4.1.2. Drum brakes
GENERAL INFORMATION
Prevention

During the work of brake shoes brake dust which contains asbestos, unhealthy therefore when cleaning brake shoes do not use compressed air is formed and do not inhale dust.

PERFORMANCE ORDER
 
1. For check of thickness of a brake shoe without removal of the brake drum remove a stopper from a brake board and, using a small lamp, check a condition of brake shoes. 2. For fuller survey of brake shoes remove back brake drums. 3. Examine a condition of a frictional layer of a brake shoe. If the surface is greasy, replace a brake shoe.
4. Examine the working brake cylinder and a condition of protective covers. In the presence of leak of brake fluid replace the brake cylinder.
5. Examine a condition of the returnable and holding springs.
6. Examine a condition of the brake drum.
7. Install brake drums.
8. Establish wheels and lower the car.