Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
+ 1. Maintenance
- 2. Engine
   2.2. Operations on repair of the engine on the car
   2.3. Top dead point of the first cylinder
   + 2.4. Cover of a head of the block of cylinders
   + 2.5. Inlet collector
   + 2.6. Final collector
   + 2.7. Gear belt and pulleys
   2.8. Replacement of a forward sealing ring of a cranked shaft
   2.9. Replacement of a sealing ring of a camshaft
   + 2.10. Camshaft and pushers
   + 2.11. Head of the block of cylinders
   + 2.12. Oil pallet
   - 2.13. Oil pump
      2.13.2. Check
      2.13.3. Installation
   + 2.14. Drive flywheel / plate
   2.15. Replacement of a back sealing ring of a cranked shaft
   + 2.16. Suspension bracket of the power unit
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment


2.13.3. Installation

GENERAL INFORMATION

Arrangement of laying of a cover of the oil pump and external rotor in the case of the oil pump

PERFORMANCE ORDER
1. Using a screw-driver, take an old sealing ring of a rotor of the oil pump and establish a new sealing ring.
2. Replace a forward sealing ring of a cranked shaft.
3. Establish consolidation of a cover of the oil pump and an external rotor of the oil pump in a flute of the case of the oil pump.
4. Grease a shaft and establish an internal rotor in a cover of the oil pump, then establish a pulley and fix a nut, having tightened it the demanded moment.
5. Establish a cover on the case of the oil pump and fix two long bolts.
6. Oil the piston of the safety valve pure engine and install all elements of the valve in the case of the oil pump.
7. Establish new laying of the oil pump on the block of cylinders.
8. Install the oil pump on the block of cylinders and fix bolts.
9. Further installation is made in sequence, the return to removal. Fill in in the engine oil to the demanded level.