Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
+ 1. Maintenance
- 2. Engine
   2.2. Operations on repair of the engine on the car
   2.3. Top dead point of the first cylinder
   + 2.4. Cover of a head of the block of cylinders
   + 2.5. Inlet collector
   - 2.6. Final collector
      2.6.1. Removal
      2.6.2. Installation
   + 2.7. Gear belt and pulleys
   2.8. Replacement of a forward sealing ring of a cranked shaft
   2.9. Replacement of a sealing ring of a camshaft
   + 2.10. Camshaft and pushers
   + 2.11. Head of the block of cylinders
   + 2.12. Oil pallet
   + 2.13. Oil pump
   + 2.14. Drive flywheel / plate
   2.15. Replacement of a back sealing ring of a cranked shaft
   + 2.16. Suspension bracket of the power unit
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment





2.6.2. Installation

PERFORMANCE ORDER
1. Clear the interfaced surfaces of a final collector and a head of the block of cylinders.

2. Establish new laying on racks of a head of the block of cylinders. Pay attention that tags on laying have to be directed to a final collector, and the arrow has to be directed to back part of the engine.

3. Fix a final collector nuts, having tightened them in some stages the demanded moment, and make a tightening from the center to the periphery.
4. Further installation is made in sequence, the return to removal.
5. Start the engine and be convinced of lack of leak of exhaust gases.