Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
- 7. System of ignition
   7.2. Accumulator
   + 7.3. System of ignition
   + 7.4. Check of system of ignition
   + 7.5. Ignition coil
   - 7.6. Ignition distributor
      7.6.1. Installation
   7.7. Check and adjustment of a corner of an advancing of ignition
   7.8. Block of ignition (switchboard)
   + 7.9. Sensor of impulses
   7.10. System of charging
   7.11. Generator
   7.12. Check and replacement of components of the generator
   7.13. System of start of the engine
   7.14. Starter
   7.15. Traction relay
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment


7.6. Ignition distributor

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Disconnect electric sockets from the ignition distributor.
3. On a cover of the distributor note situation vysokovolt a foot of a wire of the first cylinder.
4. Uncover the distributor and turn a cranked shaft of the engine so that the rotor of the distributor was directed to the plug of a high-voltage wire of the first cylinder.
5. On the case of the distributor put the tag located opposite to contact part of a rotor of the distributor.
6. Also note position of the case of the distributor in relation to the block of cylinders.
7. Unscrew bolts and remove the ignition distributor.