Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
- 13. Suspension bracket
   13.2. General information
   + 13.3. Forward stabilizer of cross stability
   + 13.4. The lobby is resistant
   13.5. Repair of a forward rack
   + 13.6. Lower lever of a forward suspension bracket
   13.7. Replacement of the lower hinge of a forward suspension bracket
   + 13.8. Rotary fist
   13.9. Back stabilizer of cross stability
   + 13.10. Rack of a back suspension bracket
   13.11. Longitudinal draft of a back suspension bracket
   - 13.12. Levers of a back suspension bracket
      13.12.2. Installation
   + 13.13. Nave of a back suspension bracket
   + 13.14. Fastener of a back nave
   + 13.15. Steering wheel
   + 13.16. Tips of steering draft
   13.17. Replacement of protective covers of steering transfer
   + 13.18. Steering transfer
   + 13.19. Pump of the amplifier of a steering
   13.20. Removal of air from system of a steering with the amplifier
   + 13.21. Wheels and tires
   13.22. Corners of installation of wheels
+ 14. Body
+ 15. Electric equipment


офтальмологические сканеры

13.12. Levers of a back suspension bracket

13.12.1. Removal

PERFORMANCE ORDER
1. Lift back part of the car and record on supports.
2. Unscrew a bolt of fastening of longitudinal thirst for the nave fastener.
3. On models with a body "station wagon" unscrew a nut of fastening of a spring of the valve of restriction of pressure (LSPV).
4. Unscrew a nut and a bolt of fastening of cross levers to the fastener of a back nave.
5. Unscrew nuts of fastening of cross levers of a back suspension bracket to a body.
6. Remove the back cross lever.
7. Unscrew the left and right clips of fastening of the stabilizer of cross stability.
8. Remove the central exhaust pipe.
9. Remove the forward cross lever of a back suspension bracket.