Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
- 13. Suspension bracket
   13.2. General information
   + 13.3. Forward stabilizer of cross stability
   + 13.4. The lobby is resistant
   13.5. Repair of a forward rack
   + 13.6. Lower lever of a forward suspension bracket
   13.7. Replacement of the lower hinge of a forward suspension bracket
   - 13.8. Rotary fist
      13.8.2. Installation
   13.9. Back stabilizer of cross stability
   + 13.10. Rack of a back suspension bracket
   13.11. Longitudinal draft of a back suspension bracket
   + 13.12. Levers of a back suspension bracket
   + 13.13. Nave of a back suspension bracket
   + 13.14. Fastener of a back nave
   + 13.15. Steering wheel
   + 13.16. Tips of steering draft
   13.17. Replacement of protective covers of steering transfer
   + 13.18. Steering transfer
   + 13.19. Pump of the amplifier of a steering
   13.20. Removal of air from system of a steering with the amplifier
   + 13.21. Wheels and tires
   13.22. Corners of installation of wheels
+ 14. Body
+ 15. Electric equipment


, .



13.8. Rotary fist

13.8.1. Removal

PERFORMANCE ORDER
1. Lift forward part of the car and record on supports. Remove a forward wheel.
2. Remove a support, without disconnecting from it a brake hose. Using a soft wire, suspend a support on a forward rack, remove a brake disk from a nave.
3. Unscrew a nut of fastening of steering thirst for a rotary fist. Using a stripper, take the spherical hinge of steering draft from a rotary fist.
4. Unscrew bolts of fastening of the spherical hinge to the lower lever of a forward suspension bracket.
5. Unscrew a nut of fastening of a power shaft to a nave. Take a power shaft from a nave, taking away a rotary fist from the car.
6. Note the provision of a rack of a forward suspension bracket on a rotary fist. Unscrew two bolts of fastening of a rack of a forward suspension bracket to a rotary fist. Thus finally take a power shaft from a rotary fist.