Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
+ 1. Maintenance
- 2. Engine
   2.2. Operations on repair of the engine on the car
   2.3. Top dead point of the first cylinder
   + 2.4. Cover of a head of the block of cylinders
   + 2.5. Inlet collector
   + 2.6. Final collector
   + 2.7. Gear belt and pulleys
   2.8. Replacement of a forward sealing ring of a cranked shaft
   2.9. Replacement of a sealing ring of a camshaft
   - 2.10. Camshaft and pushers
      + 2.10.1.1. The camshaft operating final valves
      2.10.2. Check
      - 2.10.3. Installation
         2.10.3.2. The camshaft operating final valves
   + 2.11. Head of the block of cylinders
   + 2.12. Oil pallet
   + 2.13. Oil pump
   + 2.14. Drive flywheel / plate
   2.15. Replacement of a back sealing ring of a cranked shaft
   + 2.16. Suspension bracket of the power unit
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment





2.10.3.2. The camshaft operating final valves

PERFORMANCE ORDER
1. Oil pushers pure engine and establish them in a head of the block of cylinders together with adjusting laying.
2. Oil pure engine cams and necks of a podshipna of k of a camshaft.
3. Turn the camshaft operating vpuskna mi valves in such situation that the adjusting pin was established on 10 ° from the vertical line to the left.
4. Establish the camshaft operating vypuskna mi valves in a head of the block of cylinders so that tags on gear wheels of shaft were combined.
5. Establish covers of bearings of a camshaft according to identification tags, thus shooters on covers have to be directed to forward part of the engine.

6. Gradually and consistently in the order shown in drawing, screw up bolts of fastening of covers of bearings of a camshaft.
7. Establish a pulley of a gear belt on the camshaft operating inlet valves and tighten it the demanded moment, thus hold a camshaft from a provorachivaniye the second wrench.
8. Establish a gear belt.
9. Further installation is made in sequence, the return to removal.