Toyota Camry

1992-1997 of release

Repair and operation of the car



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
- 5. Cooling and heating
   5.2. General information
   5.3. Antifreeze
   5.4. Cooling system hoses
   + 5.5. Check and replacement of the thermostat
   - 5.6. Check and replacement of the fan of a radiator and relay
      5.6.2. Check of the relay
      5.6.3. Replacement
   + 5.7. The radiator fan (the V6 models from 1992 to 1994)
   + 5.8. Radiator
   5.9. Broad tank
   + 5.10. Water pump
   + 5.11. Sensor of temperature of cooling liquid
   5.12. Heater fan
   5.13. Heater fan resistor
   5.14. Heater radiator
   + 5.15. Control panel heater
   5.16. Air conditioning system
+ 6. Fuel system
+ 7. System of ignition
+ 8. Toxicity decrease
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment





5.6.2. Check of the relay

GENERAL INFORMATION

Arrangement of the main block of the relay and relay of the fan of a radiator on models with engines 5S-FE

The main block of the relay is located in a motor compartment from the driver. Models with air conditioning have the relay No. 2.

Relay arrangement in the relay block on models with engines 1MZ-FE
and – the main relay of the engine;
b – radiator No. 1 fan relay;
with – the relay of the fan of a radiator No. 2;
d – relay of the fan of a radiator No. 3

Arrangement of contacts of the main relay of the engine

Check of resistance and arrangement of contacts of the relay of the fan of a radiator No. 1

PERFORMANCE ORDER
1. Remove the relay of the fan of a radiator No. 1 and, using an ohmmeter, check resistance between contacts of the relay (see rice. Check of resistance and arrangement of contacts of the relay of the fan of a radiator No. 1). Resistance between contacts of the relay 1 and 2 and contacts 3 and 4 has to be minimum. When giving tension from the accumulator to contacts 1 and the 2nd resistance between contacts 3 and 4 has to equal infinity.
2. If the relay of the fan of a radiator serviceable, remove the main relay of the engine and check it (see rice. Check of resistance and arrangement of contacts of the relay of the fan of a radiator No. 1 and rice. Arrangement of contacts of the main relay of the engine). Resistance between contacts of the relay 3 and 5 and contacts 2 and 4 has to be minimum. Resistance between contacts 1 and 2 has to be equal to infinity. When giving tension akkumulya a Torah on contacts 3 and the 5th resistance between contacts of the relay 1 and 2 has to be minimum, and resistance between contacts 2 and 4 has to be equal to infinity.